beautypg.com

Adjus t menu – tekmar 546 Thermostat Installation User Manual

Page 12

background image

© 2008

D 546 - 07/08

12 of 44

Item Field

Range

Access

Description

NONE, ZONE, CTRL

Default = CTRL

ADV

WARM WEATHER SHUT DOWN

SECTION R

Set the outdoor temperature at which warm weather
shutdown occurs. Select whether the thermostat
follows the tN4 System Control’s or the zone’s WWSD
for scheduled events.

40 to 100°F, OFF

(4.5 to 38.0°C, OFF)

Default = 72°F

(22.0°C)

INST

ADV

WWSD OCCUPIED AND WAKE

SECTION

R

Set the Warm Weather Shut Down (WWSD) temperature
during Occupied and Wake events.
Note: This item is only available when WWSD is set
to Zone.

40 to 100°F, OFF

(4.5 to 38.0°C, OFF)

Default = 60°F

(15.5°C)

INST

ADV

WWSD UNOCCUPIED AND SLEEP

SECTION

R

Set the Warm Weather Shut Down temperature during
Unoccupied and Sleep events.
Note: This item is only available when WWSD is set
to Zone.

OFF, 35 to 100°F

(OFF, 1.5 to 38.0°C)

Default = OFF

ADV

CWSD OCCUPIED AND WAKE

SECTION

S

Set the Cold Weather Shut Down (CWSD) temperature
for the cooling system during the Occupied and Wake
events.
Note: This item is only available when Cool Stage
is set to 1 or 2.

OFF, 35 to 100°F

(OFF, 1.5 to 38.0°C)

Default = OFF

ADV

CWSD UNOCCUPIED AND SLEEP

SECTION

S

Set the Cold Weather Shut Down temperature for
the cooling system during the Unoccupied and Sleep
events.
Note: This item is only available when Cool Stage
is set to 1 or 2.

HEAT, COOL,

H/C, OFF

Default = H/C

INST

ADV

OPTIMUM START / STOP

SECTION

M

Select whether to use Optimum Start / Stop for heating,
cooling, or both.
Note: This item is only available when either a heating
schedule and / or a cooling schedule is selected.

Lo, 2, 3, Hi

Default = Hi

ADV

RADIANT BASE LOAD

SECTION

P

Select the radiant heating load relative to the overall
heating load.
Note: This item is only available when H1 Terminal
is set to HRF1 or HRF2. H2 Terminal is set to Coil,
Convector, Radiator, Baseboard or Other, and Sensor
1, 2, 3 are not set to FLOR.

Adjust Menu (7 of 7)

ADJUS

T MENU

After the last item, the control returns to the first item in the menu.