tekmar 262 Boiler Control Installation - Manual (Page 24)

24 of 36 Copyright © D 262 -12/08
Section
• • • •
The type of setback override that is in effect.
DIP switch =
Setback
AWAY is available even if DIP ≠ Setback
NONE, TMPY Occ Ovr, PERM Occ
Ovr, TMPY UnOcc Ovr, PERM
UnOcc Ovr, AWAY Ovr
Default = NONE
LTD USERINST ADV
Range
Access
Level
Description Item Field
A
262 Schd (Schedule) Menu (1 of 1)
The frequency with which the control will exercise
the pumps and valves that are operated by
the control.
Section
262 Adjust Menu (4 of 4)
•
•
•
• • •
The system’s warm weather shut down during the
UnOccupied period.
DIP switch =
Setback
MODE = —1—
The maximum length of time that the boiler pump
will continue to operate after the heating and DHW
demands have been removed.
The portions of the heating system that will use
the Soft Start feature.
MODE = —1—
35 to 100 ˚F, OFF
(2 to 38 ˚C, OFF)
Default = 60 °F (16°C)
OFF,
0:10 to 40:00 min
Default = 0:20 min
NONE, BOIL
Default = NONE
30 to 240 hr, OFF
Default = 70 hr
UnOcc
Actual
Setting
LT
D
USERINST ADV
Range
Access
Level
Description Item Field
B1
B1
A
A
262 Monitor Menu (see pages 29 - 31)