Powers ES150 Emergency Tempering Valves with Dual Internal Cold Water By-Pass - Manual (Page 2)

TI ES150 v3 Page 2
1
2
3
4
5
6
7
8
9
10
11
12
13
The mixing valve should be mounted as close as possible to
the fixture(s) that it serves.
If the valve is some distance from the hot water source, recir-
culation may be required to keep the hot water supply within
specified limits.
CAUTION: Use care in installing the cold water line such
that it does not pass through areas with high ambient
temperatures or become exposed to direct sunlight.
Cold water must be less than set point.
Powers ES Series
Tempering Valve
Hot Water Recirculation
Cold Water
Hot Water Return
Hot Water
H C
Tempered Water
to Fixtures
TAG DESCRIPTION
1 Body
2 “O” Ring
3 Cartridge
4 Actuator
5 “O” Ring
6 Bonnet
7 Overload Assembly
8 Max. Temp. Spacer
9 Max. Temp. Adj. Screw
10 Adjustment Screw
11 Screws (4)
12 Adjustment Locking Screw
13 “O” Ring
DESCRIPTION KIT NUMBERS
Actuator Replacement Kit (4, 5) 390 579
Cartridge Replacement Kit (3, 5) 390 580
Gasket and “O” Ring Kit (2, 5, 13) 390 581
PARTS LIST
REPAIR KITS
RECIRCULATION