Powers 450-e700 HydroPanel II Shower System with HydroGuard T/P Series e700 Combination Valve - Manual

HydroPanel ® II Shower System
with HydroGuard ® T/P Series e700 Combination Valve
Technical Instructions
IS-P-450-700
HydroPanel ® II
Model 450-7100
HydroPanel ® II
Model 450-7054
Description
■
The Powers HydroPanel ® II Shower System with HydroGuard ®
T/P Series e700 valve combines water control with the con-
venience of modular shrouding. HydroPanel
® II stainless steel
shrouding provides a concealed shower system where in-
wall piping does not exist or may not be practical.
The Series 450-7100 and 450-7050 HydroPanel ® II comes com-
plete with the stainless steel HydroPanel ® II shrouding, Series
e700 valve with checkstops, piping, showerhead, end cap and
mounting hardware. Some models feature a stainless steel
soap dish. An optional hand shower comes pre-assembled
with a full spray push button hand shower, 60" hose, 18"
mounted glide-bar and connectors. The Series e700 valve is
CSA approved and ASSE type T/P listed.
The following instructions serve as guide for installation, gen-
eral maintenance and parts replacement for HydroPanel
® II
Shower Systems with e700 T/P combination Valves. For
detailed repair and maintenance instructions for the e700
valve or integral checkstops, please refer to Form ES-P-E700.
For specification or installation of the HydroPanel
® II Modular
Shrouding for shower rooms, please refer to ES-P-450SH.
Specifi cations
■
HydroPanel ® II : Brushed 18 Gauge 304 SS. Dimensions:
31-1/8" H x 7-1/2" W x 6" D (791 mm H x 191 mm x 154 mm D).
Piping: 1/2" (15mm) copper tubing.
Showerhead: Fixed: Chrome plated brass, maximum flow
2.5 gpm @ 80psi (0.16 l/s @ 552 kPa). Adjustable Swivel:
Chrome plated brass, 30° angle of rotation, maximum flow
2.5 gpm @ 80psi (0.16 l/s @ 552 kPa).
Valve Assembly and Trim: HydroGuard T/P Series e700
Combination Valve. Four port (bottom outlet plugged), cast brass
body with chrome plated zinc or ABS lever handle. 1/2" (15mm)
sweat inlet/outlet connections. Standard integral checkstops.
Metal to metal limit stop.
Valve Operation: 4.0 gpm @ 45psi differential
(15 l/min. @ 310 kPa). Maximum pressure (static)
125psi (862 kPa). Maximum inlet temperature 190°F (88°C).
Hand Shower: Full spray with pushbutton water control.
Minimum flow 2.0 gpm @ 20psi (0.13 l/s @ 138 kPa). Maximum
flow 2.5 gpm @ 80psi (0.16 l/s @ 138 kPa). 1/2" (15mm) chrome
finished supply connections. 24" (610 mm) chrome finished brass
glide bar, self-tensioned for easy height adjustment. Professional
model: 60" (1499 mm) reinforced vinyl hose. Deluxe Model:
60" (1499 mm) metal spiral hose.
Operation
■
Hot and cold water enter respective ports in the valve and mix
in a chamber containing an advanced thermal actuator. This
actuator controls the position of the plunger and temperature.
Rotating the adjustment handle repositions the plunger in the
cartridge assembly to produce the desired temperature. The
mixed water passes over the shutoff disc to the outlet. If the
hot or cold supply water temperature or pressure changes,
the thermal actuator contracts or expands. This movement
repositions the plunger to maintain the desired temperature.
With the adjustment handle in full clockwise (OFF) position,
the shutoff disc closes the mixing chamber from the outlet.
A high temperature limit stop restricts the movement of the
control handle. All HydroGuard
® T/P e700 valves are factory
set to deliver tempered water up to 110°F (43°C) with equal
supply pressures, with hot water temperature 140°F (60°C),
cold water temperature 60°F (15.6°C).
Features
■
• Installation requires minimal hardware: Mount the
brackets, connect supply piping and hang shrouding.
• All exposed surfaces are easy to clean stainless steel
or chrome plated.
• Fixed (vandal resistant) and swivel showerheads
are available.
• Single handle control and color coded dial offer quick
and easy temperature selection.
• Optional hand-held showers with flexible hoses mount
on 24" (610mm) glide rails for use in special applications.
• Optional HydroPanel ® II Modular Shrouding offers convenient
configuration of horizontal and vertical panels to cover all
exposed shower room piping. See ES-P-450SH for details
on HydroPanel
® II Modular Shrouding.
• HydroGuard ® T/P Series e700 are CSA certified and ASSE 1016
type T/P listed.