beautypg.com

Powers 440 Series Fotoguard User Manual

Installation instructions

background image

1.

Flush all piping thoroughly before installing.

2.

Facing front of mixer, connect hot water to left side
(marked HOT) and cold water to right side (marked
COLD). Inlet connections must be piped correctly for
proper operation of Fotoguard.

3.

If copper tubing is used, do not apply heat within 12”
(30.5 cm) of Fotoguard. Excessive heat will damage
internal parts of Fotoguard.

INSTALLATION INSTRUCTIONS

SERIES 440 FOTOGUARD AND

440 SUPPLY FIXTURES

A Watts Industries Co.

INSTALLATION INSTRUCTIONS

SERIES 440 STANDARD FOTOGUARD - CONCEALED

SERIES 440 STANDARD FOTOGUARD - FOR EXPOSED PIPING

SERIES 440 FOTOGUARD HIGH CAPACITY

440-SUPPLY FIXTURES

Dimensions - inches (millimeters)

A=13/8” (35)
B=13/4” (44)

Piping dimensions above are the same
for both the 131-1575 and the 131-1813.

Form 129-008