Brother Facsimile Equipment MFC7420 - Manual (Page 283)

App. 4-20 Confidential
WSW16 (Function setting 1)
Selector
No.
Function Setting and Specifications
1 Not used.
2
ITU-T (CCITT) superfine
recommendation
0: OFF 1: ON
3
|
6
Not used.
7
Max. document length
limitation
0: 400 cm 1: 90 cm
8
Stop/Exit key pressed during
reception
0: Not functional 1: Functional
NOTE: Selector 7 is applicable to models equipped with ADF units.
Selector 2: ITU-T (CCITT) superfine recommendation
If this selector is set to "1," the machine communicates in ITU-T (CCITT) recommended superfine
mode (15.4 lines/mm). If it is set to "0," it communicates in native superfine mode.
Selector 7: Max. document length limitation
This selector is used to select the maximum length of a document to be sent.
Selector 8: Stop key pressed during reception
If this selector is set to "1," pressing the Stop/Exit key can stop the current receiving operation.
The received data will be lost.