E-flite F-4 Phantom 32 DF - Manual (Page 34)

34 E-flite F-4 Phantom 32 DF Assembly Manual
 3. Secure the battery in the fuselage using the hook
and loop strap. Make sure the strap is not pinching
any of the servo leads on the bottom side of the
battery tray.
Canopy Assembly
Required Parts
Canopy Cockpit interior
Pilot (optional) (PKZ4414) (2)
Required Tools and Adhesives
Hobby scissors Clear tape
Silicone adhesive
 1. Locate the cockpit interior and use hobby
scissors to trim the interior along the inscribed line.
Trim the interior a little outside the line so it can be
trimmed to fit to the canopy.
 2. Use hobby scissors to trim the height of the pilots
so they are 1 1 /
4
-inches (31mm) in height.
 3. Use silicone adhesive to glue the pilots to the
cockpit interior.
You can add more detail to the F-4 Phantom
32 cockpit by painting parts of the cockpit with
different colors so it looks more realistic.
 4. Place the interior in the canopy. It may be
necessary to bend the interior slightly to fit past the
canopy frame.