E-flite Hawker Sea Fury 400 ARF - Manual (Page 31)

31 E-flite Hawker Sea Fury 400 ARF Assembly Manual
 6. Attach both elevator halves to the stabilizer. Remember
to work quickly to avoid having the CA cure before the
elevator installation is complete.
 7. Remove the clevis from the 13 7 /
32
-inch (335mm)
pushrod. Slide the pushrod into the preinstalled tube in
the fuselage.
 8. Connect the bend in the pushrod to the elevator servo
horn. Position the horn so the angle between it and the
pushrod wire is 90 degrees. Secure the horn to the servo.