E-flite Hawker Sea Fury 400 ARF - Manual (Page 28)

28 E-flite Hawker Sea Fury 400 ARF Assembly Manual
 9. Test fit the rudder to the fin. Once satisfied with the
fit, use foam-safe CA on the hinges and tail gear wire to
secure the rudder to the fin. Make sure not to get CA in
the tail gear assembly.
 10. Slide the wheel spacer onto the tail gear wire.
 11. Slide the tail wheel onto the tail gear wire.
 12. Secure the wheel using the wheel axle cap and
foam-safe CA. Use care not to get CA between the
tail gear wire and wheel, which will prevent the
wheel from rolling.