E-flite Hawker Sea Fury 400 ARF - Manual (Page 29)

29 E-flite Hawker Sea Fury 400 ARF Assembly Manual
Stabilizer/Elevator Installation
Required Parts
Fuselage assembly Stabilizer assembly
13 7 /
32
-inch (335mm) pushrod w/clevis
13 9 / 16
-inch (345mm) pushrod w/clevis (for optional rudder)
Required Tools and Adhesives
Foam-safe CA
 1. Remove the elevators and elevator joiner wire
from the stabilizer.
 2. Place the elevator joiner wire in the slot in the fuselage
for the stabilizer.