E-flite Hawker Sea Fury 400 ARF - Manual (Page 13)

13 E-flite Hawker Sea Fury 400 ARF Assembly Manual
 2. Prepare the aileron servos by installing the servo arms
on the servos. Use your radio to center these servos at
this time.
 3. Apply a piece of double-sided tape onto each servo,
on the side opposite the servo arm.
 4. Remove the backing from the double-sided tape.
Position the servo so the arm is facing toward the aileron
and the outboard side off the wing. Press each aileron
servo into the openings in the wing.