E-flite Hawker Sea Fury 400 ARF - Manual (Page 18)

18 E-flite Hawker Sea Fury 400 ARF Assembly Manual
 3. Lift the hatch from the fuselage as shown.
 4. Remove the battery stop from the inside of the fuselage
by sliding it rearward and out of the fuselage.
Important Information About Your Brushless ESC
Make sure your ESC brake is programmed to Off. Also,
be sure to use an ESC with the proper low-voltage cutoff
and have it set correctly for the batteries you are using.
Note: Never check the motor rotation on the bench
with the propeller installed. The plane could move and
cause serious injury. Always check the motor without the
propeller to avoid injury.
 5. Connect the battery and servo lead extensions to the
speed control. Secure them using string to prevent them
from being unplugged inside the fuselage.