Banner SureCross DX80 Wireless Networks - Manual (Page 69)

Manufacturer Device Model Boost Voltage Warmup Time
3 Turck Pressure PT100R-11-L13-H1131 10V 10 ms
Sample and Report Rates
1 second 2 seconds 4 seconds 16 seconds 64 seconds 5 minutes 15 minutes
1 0.00 0.00 0.00 0.26 0.91 2.61 4.45
2 0.87 1.45 2.15 3.32 3.89 4.25 4.25
3 0.87 1.45 2.15 3.32 3.89 4.25 4.25
Note, battery life calculations are based on the sensor operating 24 hours a day, 365 days a year.
QT50ULBQ6-75390
PT100R-11-L13-H1131
KPSI Series 700
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
1 sec 2 sec 4 sec 16 sec 64 sec 5 min 15 min
Sample and Report Rates
D
X81
B
att
er
y
Li
fe
(Y
ea
rs
)
For each sensor characterized, a boost voltage and warmup time was specified. The sample and reports rates were varied
to calculate the estimated battery life. For example, a Banner QT50ULBQ6-75390 sensor set to a boost voltage of 15 volts,
a warm-up time of 500 milliseconds, and a sample and report rate of 15 minutes, should have a battery life of 4.45 years.
All battery life calculations are approximations based on a strong radio signal. Weaker radio connections and missed
packets will decrease the battery life.
8.3.2 Discrete Configuration
The battery life calculations, in years, for some discrete sensors are shown in the table below.
Table 2: Battery Life in Years
Manufacturer Device Model Boost Voltage Warmup Time
1 Banner Optical SM312DQD-78419 5V 4 ms
2 Turck Inductive Proximity Bi10U-M30-AP6X-H1141 10V 10 ms
SureCross Wireless I/O Networks
69