Banner SureCross DX80 Wireless Networks - Manual (Page 31)

5.1.1 RUN Menu
The RUN menu displays the network ID (NID), device name (Gateway or Node), and the I/O values of the device.
* RUN
AUTO
DISPLAY
LOOP
adjust the rotary
switches to survey
the selected Node
(DEV)
I/O XX
GATEWY
NID XX
ON/OFF
(DEV)
I/O XX
GATEWY
NID XX
ON/OFF
Single-click
Button 1
Single-click
Button 1
* RUN
AUTO
DISPLAY
LOOP
(DEV)
I/O XX
NOD XX
NID XX
ON/OFF
Single-click
Button 1
0.00
Gateway Node On the Gateway, the I/O displayed may be the I/O of the
Gateway or of a selected Node. To view the I/O of a specific
Node, set the position of the rotary dials to the Node's
address. For example, to view the I/O of Node 12, set the
Gateway's left rotary dial to 1 and the right rotary dial to 2.
When using extended address mode, the network ID (NID)
is not used. The Network ID is typically used only in rotary
dial address mode.
SureCross Wireless I/O Networks
31