Metrohm 940 Professional IC Vario ONE/SeS/PP/Prep 3 - Manual (Page 28)

3.4 Removing transport locking screws
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
18 ￭￭￭￭￭￭￭￭
940 Professional IC Vario ONE/SeS/PP/Prep 3 (2.940.1530)
3.4 Removing transport locking screws
To avoid damage to the drives for the high-pressure pump and the vac-
uum pump during transport, the pumps are secured with transport lock-
ing screws. These are located at the rear of the instrument and labeled
with Transport security screws.
Remove these transport locking screws before the initial start-up.
Accessories For this step you need:
￭ Hex key 4 mm (6.2621.030)
Remove the transport locking screws
Figure 6 Removing the transport locking screws
1 Transport locking screws
For the vacuum pump. 2 Transport locking screws
For the high-pressure pump.
3 Transport locking screws
For an additional high-pressure pump in the
bottom drawer.
1 Remove all of the transport locking screws with the hex key.