Metrohm 750 Autosampler - Manual (Page 9)

1 Introduction
750 Autosampler
6
1.4 Information on the Instructions for Use
Please read through these Instructions for Use carefully before you put
the 750 Autosampler into operation. The Instructions for Use contain
information and warnings which must be heeded by the user to assure
safe operation of the instrument.
1.4.1 Organization
These 8.750.1023 Instructions for Use for the 750 Autosampler pro-
vide a comprehensive overview of the installation, startup procedure,
operation, fault rectification and technical specifications of the instru-
ment. The Instructions for Use are organized as follows:
Section 1 Introduction
General description of instruments, control parts
and safety notes
Section 2 Installation
Installation of the 750 Autosampler, connection to
IC Separation Center 733, initial checkout
Section 3 Operation
Detailed description of the operation and
explanation of functions of all keys
Section 4 Notes – Maintenance – Faults
Notes on operation, maintenance,
fault rectification, diagnostic tests
Section 5 Appendix
Technical data, interfaces, standard equipment,
options, warranty, declarations of conformity, index
To find the required information on the instruments, you will find it an
advantage to use either the Table of contents or the Index at the
back.