beautypg.com

1 introduction, Instrument description, Theory of operation – Metrohm 750 Autosampler User Manual

Page 4: Control elements, Information on the instructions for use, Organization, Notation and pictograms, Safety notes, Electrical safety, General precautionary rules

background image

1.1 Instrument description

750 Autosampler

1

1

Introduction

1.1

Instrument description

The 750 Autosampler is a microcomputer-operated sampling/con-

troller system designed to be used with the ion chromatographic in-

struments 732 IC Detector and 733 IC Separation Center. It has a ca-

pacity of up to 128 samples, which are transferred automatically into

the sample loop of the 733 IC Separation Center.
The 750 Autosampler performs up to four, fixed loop injections per vial

at user-selectable time intervals. All operating parameters are entered

from the front panel. Additionally, the instrument can be controlled re-

motely either by an externally programmable contact closure or through

the RS232 connector located on the rear panel.

Fig. 1: 750 Autosampler

See also other documents in the category Metrohm Equipment: