Metrohm 750 Autosampler - Manual (Page 23)

3 Operation
750 Autosampler
20
ERROR
Value out of range
Enter value between
## - ## ##
where # and ## are the appropriate range limits. The error message will
remain on the display until the key is pressed.
Parameter lines which contain the characters "
< " and/or " > " (e.g. " NONE> ")
on either side of the parameter value indicate that a selection must be
made from a discreet menu of items. Pressing either the <
а а
> or <
Я Я
>
key allows scrolling through the selection list. When the desired selec-
tion is displayed, press either the , <
б б
> or <
в в
> key to
confirm the selection.
3.1.2 Overview of key functions
RINSE INJECTION
MANUAL
METHOD
REM/LOC TEMP SYSTEM
F3 F2 F1
4
7
. CLEAR
1
0
8 9
5 6
2 3
FUNCTION
RUN/STOP
PRIORITY
ENTER
Fig. 8: Keypad
The keypad of the 750 Autosampler contains 4 main function keys, 12
numerical keys (incl. ) and 4 cursor keys. In the basic condi-
tion the functions given above the numbers can also be activated by
pressing the key and the corresponding numeric key.
The following table provides a brief overview of the different functions of
the individual keys of the 750 Autosampler. You will find more detailed
information on the key functions in sections 3.2 …3.8.
Main function keys Numeric keys
Cursor keys