Metrohm 870 KF Titrino plus Installation - Manual (Page 9)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Installation
870 KF Titrino plus ￭￭￭￭￭￭￭￭ 3
Mounting the stand
1 1
2
3
6.2016.070
6.2001.060
1 Screw the stand plate 6.2001.060 with the accompanying four
screws tightly to the bottom of the instrument.
2 Guide the support rod 6.2016.070 from above into the titration
stand and slide all the way down to the bottom.
3 Screw the stand plate with the hexagon screw (hexagon key sup-
plied) firmly to the titration stand to mount the support rod.
Plugging in the mains cable
Warning
Note mains voltage.