Metrohm 870 KF Titrino plus Installation - Manual (Page 42)

3.2 Carrying out titrations ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
36 ￭￭￭￭￭￭￭￭ 870 KF Titrino plus
￭ Press [START].
Conditioning is stopped. The request for adding the sample will
be displayed for 8 s.
The sample should be added during this time.
￭ Add the sample.
Afterward, the request for the sample size appears:
4 Enter the sample size
￭ Open the editing dialog with [OK].
￭ Enter the sample size and apply with Accept or [BACK].
5 Start the titration
￭ Press [START].
The titration starts and the curve is displayed:
After the completion of the titration, the results dialog is displayed. If
a printer is connected, then the report will now be printed out. Con-
ditioning is restarted automatically.