Metrohm 870 KF Titrino plus Installation - Manual (Page 20)

2.5 Setting up tubings and tips ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
14 ￭￭￭￭￭￭￭￭ 870 KF Titrino plus
Attaching the exchange unit
1 Slide the exchange unit from the front onto the 870 KF Titrino plus
and push all the way to the rear.
It must snap in audibly.
Inserting the titration tip
1
1 Insert the titration tip of the exchange unit into the remaining open-
ing at the rear on the vessel lid.
The end of the tip should be located just above the stirring bar, but is
not permitted to touch it.