Metrohm 870 KF Titrino plus Installation - Manual (Page 28)

3.2 Carrying out titrations ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
22 ￭￭￭￭￭￭￭￭ 870 KF Titrino plus
￭ Select the a balance type and apply with [BACK].
The balance is entered in the dialog External devices.
Under COM1 settings you have to set the interface parameters
of the connected balance (see manual 870 KF Titrino plus). Use
the identical settings as defined for the balance.
Switching to the main dialog
1 Repeated pressing on [BACK] will switch you to the main dialog.
3.2 Carrying out titrations
3.2.1 Creating a method for titer determination
Below you will find a description of how to create your own method for
titer determination. The 870 KF Titrino plus contains method templates
which are already configured except for a few parameters.
The titer of the reagent should be determined by a fivefold determination
of a water standard. If you have a printer connected, then a report with
the result and the curve should be printed out automatically at the end of
the determination.
Proceed as follows:
1 Load the method template