Metrohm 870 KF Titrino plus Installation User Manual
Page 41
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
3 Tutorial
870 KF Titrino plus
￭￭￭￭￭￭￭￭
35
2 Enter the sample data
You can enter information about the sample in different ways. You
can enter the sample data (sample size and sample identifications) at
the start of a determination. To do that, you can activate an auto-
matic request by the instrument (under Menu
▶ Parame-
ters
▶ Start conditions). You can also enter the sample data dur-
ing the conditioning of the titration cell or during the running deter-
mination. Of course all this applies as well if you transfer the sample
size from a balance.
By default, the automatic request of the sample size at the start of
the determination is activated.
Now, enter information about the sample:
￭
Press [BACK].
The 870 KF Titrino plus switches from the live display to the main
page.
￭
Select ID1 and press [OK].
￭
Enter the text (e.g. product name, number of the analysis etc.)
and apply with [BACK].
￭
Select ID2 and press [OK].
￭
Enter the text (e.g. batch number, sampling date etc.) and apply
with [BACK].
￭
With [BACK], switch again to the live display.
3 Add sample
Note
Calculate the amount of the sample in such a way that a titrant
consumption of 10...90 % of the cylinder volume will result.