Metrohm 870 KF Titrino plus Installation - Manual (Page 10)

2.1 Setting up and connecting the instrument ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 ￭￭￭￭￭￭￭￭ 870 KF Titrino plus
Connecting the titration stand to the MSB 1
Observe the marking on the socket.
Connecting the electrode cable
6.2104.020
The electrode cable 6.2104.020 is protected against accidental disconnec-
tion of the cable by means of a "pull-out protection" feature. If you wish
to remove the plug, then you must first retract the outer plug sleeve.
Connecting a printer or other USB instruments
Adapter 6.2151.100 is supplied for the purpose of connecting instruments
or storage media or similar that are equipped with a USB interface.
6.2151.100
A printer can be connected directly to the adapter (with a connecting
cable 6.2151.020), as can a USB keyboard or a USB storage medium (USB
Memory Stick for storing methods, etc.).
If several instruments are to be connected, then it is recommended that a
USB hub (available from speciality dealer outlets) be used and that this be
connected to the adapter 6.2151.100. The USB hub then functions as a
distributor to which several USB instruments, etc. are connected.
The cable 6.2151.120 is available as a possible alternative; using this
cable, a printer, a USB hub or an RS 232/USB Box (see next section) can be
attached directly, without an adapter, to the 870 KF Titrino plus.