Metrohm 870 KF Titrino plus Installation - Manual (Page 31)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Tutorial
870 KF Titrino plus ￭￭￭￭￭￭￭￭ 25
￭ Select the menu item Statistics and open the corresponding dia-
log with [OK].
￭ Select the parameter Number of determinations and open the
editing dialog with [OK].
￭ Enter the number of titer determinations to be carried out, in this
example 5.
￭ Apply the value with Accept or [BACK].
Note
Continue with step 6, if you do not have a printer connected.
5 Select the reports
￭ With [BACK], switch to the parameters dialog.
The arrow at the lower right edge of the screen indicates that the
dialog contains more menu items. These can be selected as usual
with the arrow key [
↓].
￭ With the arrow key [ ↓], select the menu item Reports and open
the corresponding dialog with [OK].
The list of available reports is displayed:
￭ Select the parameter Results and confirm with [OK].
￭ Select on and confirm with [OK].
￭ Select the parameter Curve and confirm with [OK].