Metrohm 870 KF Titrino plus Installation - Manual (Page 27)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Tutorial
870 KF Titrino plus ￭￭￭￭￭￭￭￭ 21
Selecting a printer
If you would like to print the results automatically or manually, you have
to configure a connected printer.
Proceed as follows:
1 ￭ With the arrow key [ ⇩], select the menu item Printer and con-
firm with [OK].
The printer list opens:
￭ Select the printer type and apply with [BACK].
The new printer is entered in the dialog External devices.
Selecting a balance
The sample size can directly be read in from a balance. For this, you have
to select the balance type and configure it.
Proceed as follows:
1
￭ With the arrow key [ ⇩], select the menu item Balance and con-
firm with [OK].
The list with the balances supported by the 870 KF Titrino plus
opens.