Metrohm 870 KF Titrino plus Installation - Manual (Page 11)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Installation
870 KF Titrino plus ￭￭￭￭￭￭￭￭ 5
Connecting a balance
Balances are equipped as a rule with a serial RS 232 interface. To connect
a balance, you require an RS 232/USB Box 6.2148.030.
6.2151.020
When a USB cable 6.2151.020 is used, then the RS 232/USB Box
6.2148.030 can be connected to the 870 KF Titrino plus by means of a
USB hub or an adapter 6.2151.100 (see preceding section).
Connect the 9-pin plug of the respective balance connecting cable to the
RS-232/1 connector. Consult the user manual for the balance or the
manual for the 870 KF Titrino plus in order to select the correct connect-
ing cable.
The parameters for the RS 232 interfaces on the instrument must match
those on the balance. For this purpose, check the user manual for the bal-
ance and the manual for the 870 KF Titrino plus.