Metrohm 870 KF Titrino plus Installation - Manual (Page 39)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Tutorial
870 KF Titrino plus ￭￭￭￭￭￭￭￭ 33
Note
Continue with step 6, if you do not have a printer connected.
5 Select the reports
￭ With [BACK], switch to the parameters dialog.
The arrow at the lower right edge of the screen indicates that the
dialog contains more menu items. These can be selected as usual
with the arrow key [
↓].
￭ With the arrow key [ ↓], select the menu item Reports and open
the corresponding dialog with [OK].
The list of available reports is displayed:
￭ Select the parameter Results and confirm with [OK].
￭ Select on and confirm with [OK].
￭ Select the parameter Curve and confirm with [OK].
￭ Select on and confirm with [OK].
6 Save the method
￭ The modified parameters are saved automatically. It is not neces-
sary to save the method under a name of its own.
7 Switch to the main dialog
￭ Repeated pressing on [BACK] will switch you to the main dialog.