Metrohm 870 KF Titrino plus Installation User Manual

Page 26

3.1 Configuration

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭

￭￭￭￭￭￭￭￭

870 KF Titrino plus

￭

Select the menu item System and open the system dialog with
[OK].

￭

Select the menu item External devices and confirm with [OK].
The list of configurable external devices is displayed:

Saving PC/LIMS reports on a USB stick

￭

With the arrow key [

⇩], select the menu item PC/LIMS report

and confirm with [OK].
The properties dialog PC/LIMS report opens:

￭

Select USB Stick and apply with [BACK].

Sending PC/LIMS reports directly to a PC

If you directly send the PC/LIMS reports to a PC and import them into
tiBase, you have to configure the COM2 port.

Proceed as follows:

1 Define the PC/LIMS report

￭

With the arrow key [

⇩], select the menu item PC/LIMS report

and confirm with [OK].
The properties dialog PC/LIMS report opens:

￭

Select COM2 and apply with [BACK].

2 Configure the interface

￭

Select COM2 settings and confirm with [OK].

￭

Select Handshake and confirm with [OK].

￭

Select software and apply with [Back].