Metrohm 754 Dialysis Unit - Manual (Page 10)

2.1 Setting up the instrument
754 Dialysis Unit
7
2 Installation
2.1 Setting up the instrument
2.1.1 Packaging
The 754 Dialysis Unit is supplied together with the separately packed
accessories in special packagings containing shock-absorbing foam
linings designed to provide excellent protection. The actual instrument
is packed in an evacuated polyethylene bag to prevent the ingress of
dust. Please store all these special packagings as only they can assure
damage-free transport of the instrument.
2.1.2 Check
After receipt, immediately check whether the shipment is complete and
undamaged (compare with delivery note and list of accessories in
section 5.2). In the case of transport damage, see instructions in
section 5.4.1 "Warranty".
2.1.3 Location
Position the instrument in the laboratory at a location convenient for
operation, free from vibrations and protected against a corrosive
atmosphere and contamination by chemicals.
2.1.4 Arrangement of the instruments
To make the connections with the tubing supplied, position the 754 Di-
alysis Unit immediately under the 733 IC Separation Center. The other
units (732 IC Detector, 709 IC Pump, 753 Suppressor Module) can be
arranged as required.
Take precautions to ensure that any leaks from pump tubings or
connections cannot cause more damage.