Power issues, No power to pc blade, Chassis power does not come on – ClearCube R-Series Data Center Products User Manual
Page 132: Video issues
108 • Troubleshooting
R-Series Data Center Products User’s Guide
Power Issues
No power to PC blade
•
Check the power button on the front of the PC blade.
•
Verify that the power circuit to the chassis is operational.
•
Check all power strips, UPS, and extension cords to make sure they are in
working order.
No video or link lights at desktops and no power to
blades
•
R4300: Have a qualified service technician check the fuse.
Chassis power does not come on
•
R4300: Have a qualified service technician check the fuse.
Video Issues
Digital link shows red at blade but green on C/Port
•
The switch matrix in the R4300 chassis may be in a partially switched condition.
Switch the affected blade to the Admin C/Port and then back.
CAUTION: DOUBLE POLE/NEUTRAL FUSING
The DIM employs fuses in both the neutral and hot lines.
NOTE
The C/Port light is only applicable if a C/Port is connected to the
blade. If you are connecting to a blade with a PCoIP zero client
and a C/Port is not connected to the blade, the C/Port light is not
applicable and is always red.