ClearCube R-Series Data Center Products - Manual (Page 74)

50 • Chassis and Blade Installation R-Series Data Center Products User’s Guide
RMMGateway RMM Gateway Ignored if IP Mode = DHCP 192.168.1.1
RMMLocation1 RMM Location 1 User-editable text string Blank
RMMEthernetSpeed RMM Ethernet Speed Auto | 10 | 100 Auto
RMMEthernetDuplex RMM Ethernet Duplex Auto | Half | Full Auto
RMMLocation2 RMM Location 2 User-editable text string Blank
SessionTimeout Session Time-out
Time period for which the session ID is
honored
120 seconds
SMIP Sentral Primary Console IP Address xxx.xxx.xxx.xxx 192.168.1.252
SMPort Sentral Management Port TCP port to the Sentral console 8080
Logging Logging Enabled | Disabled Disabled
LogServerIP Log Server IP Address Only if logging is enabled 192.168.1.253
LogServerPort Log Server Port TCP port to the Log Server 8080
LogLevel Logging Level
• 2 — Errors, Warnings, and Notes
• 1 — Errors and Warnings
• 0 — Errors only
2 (highest)
Alerting Alerting Enabled | Disabled Disable
AlertServerIP Alert Server IP Address Only if alerting is enabled 192.168.1.254
AlertServerPort Alert Server Port TCP port to the Alert Server 8080
AlertLevel Alert Level
• 2 — Errors, Warnings, and Notes
• 1 — Errors and Warnings
• 0 — Errors only
2 (highest)
Note: All RMM ALerts
are in English
CommunityString Community String Public | Private Public
SSL SSL Enabled | Disabled Disabled
SSH SSH Enabled | Disabled Disabled
Telnet Telnet (un-encrypted) Enabled | Disabled Enabled
http HTTP (un-encrypted port 80) Enabled | Disabled Enabled
AuthMode Authentication mode Domain | Local Local
AuthGroup Authentication group Group names on active directory N/A
Username Username Text string, when in local mode clearcube
Password Password Text string, when in local mode clearcube
Table 10 R4300 RMM Default Configuration Settings (Continued)
Field Name Function Setting Options Default Setting