ClearCube Grid Center Admin Guide 4.11 - Manual (Page 52)

Figure 24 Creating an I/Port Group
46 • Allocation Grid Center 4.11 Administrator’s Guide
Note: I/Ports cannot be added to more that one group. Each I/Port can belong to
only one group.
To delete an I/Port from an I/Port group, do the following:
1. Click on the check box next to the I/Port to be deleted in the right pane.
2. Click Delete I/Ports in the center pane.
3. You are prompted for confirmation before the I/Port is removed from the
group.
4. Click the Save button.
Multiple I/Ports in a group can be selected for deletion. If you do not click Save, the
changes are discarded and the group remains unchanged.
As with Blades in a Blade group, this process removes the I/Port from the group in the
Grid Center database. The I/Port itself remains untouched, and is available to be
added to a different group.
You can create an I/Port group and populate it in a single step by entering the name
and other parameters for the group, clicking on I/Ports in the left pane, and clicking
Add or Save.