Brandmotion 1008-6509-V1 - Manual (Page 9)

INSTALLATION INSTRUCTIONS
6509 Instructions 6-18-12 F series (1).doc 9 of 23
Section 4: Chassis Harness Installation continued
28. Route the exterior portion of the
supplied chassis harness along existing
vehicle chassis harness and over fuel tank.
Using supplied tie wraps, secure the harness
to existing wiring at 2 inch intervals (Figures
20 and 21).
Figure 20
Figure 21
29. Loop any excess from the harness as
shown and secure with tie wraps (Figure 22).
Figure 22
30. Plug the chassis harness into the
camera harness installed earlier under the
pickup bed (Figure 23).
Figure 23