Brandmotion 1008-6509-V1 - Manual (Page 6)

6509 Instructions 6-18-12 F series (1).doc 6 of 23
Section 3: Camera Installation
17. Mounting Camera
17a. Remove material between camera
opening and round hole for harness clearance
(apply supplied Z-tech to any exposed bare
metal with a small brush). Insert the two
retainer clips (Figure 10).
Figure 10
17b. Route the camera harness through
tailgate opening (Figure 1O.5).
Figure 10.5
18. Run camera harness through opening in
the base of the tailgate and seat grommet in
pickup bed (Figure 11).
Figure 11
19. Using the two supplied 7mm screws,
attach camera mount to tailgate. Press the
supplied emblem into the camera mount.