Add the drive to the project, Add the drive to, The project – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual

Page 90

Publication IASIMP-QS010B-EN-P - October 2009

Chapter 5 Add a PowerFlex 40 Drive

Add the Drive to the Project

1. Verify that you are not online with the

packaged controller.

2. Right-click your network port and choose

New Module.

3. Expand Drives.

4. Select the PowerFlex 40-E.

5. Click OK.

6. In the Name box, type

a name for the drive.

7. Enter the IP Address

for your drive.

Use the

as a reference.

8. Click Change.