Battery maintenance, Battery for use with packaged controllers, Check battery power level – Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
Page 237: Chapter 6, Chapter
![background image](/manuals/581737/237/background.png)
237
Publication IASIMP-QS010B-EN-P - October 2009
237
Chapter
6
Battery Maintenance
Battery for Use with
Packaged Controllers
Use battery 1769-BA with the CompactLogix packaged controllers.
Check Battery Power Level
Use the BATT status indicator to determine the battery power level.
Battery Status Indicator
When the packaged controller is powered, the battery indicator provides
battery power status as described in this table.
If the packaged controller is not powered, you cannot determine the battery
power level.
Topic Page
Battery for Use with Packaged Controllers
ATTENTION
The 1769-BA battery is the only battery you can use with the
CompactLogix packaged controllers.
The 1747-BA battery is not compatible with the CompactLogix
packaged controllers and may cause problems if used with a
packaged controller.
If the BATT status indicator is
Then
Off
The battery has sufficient charge.
On (Red)
The battery is 95% discharged and will not
retain memory in the event of a power loss.
Batt
Force
Run
I/O
OK
DCH 0
RUN
PROG
REM
IP
MS
Battery Status
Indicator