Rockwell Automation 1769-L23E-QB1B_L23E-QBFC1B_L23-QBFC1B CompactLogix Packaged Controllers Quick Start and User Manual User Manual
1769 compactlogix packaged controllers
Table of contents
Document Outline
- IASIMP-QS010B-EN-P, 1769 CompactLogix Packaged Controllers Quick Start and User Manual
- Summary of Changes
- Assemble the CompactLogix Hardware
- Prepare the Computer, Network, and Controller
- Before You Begin
- What You Need
- Follow These Steps
- Terminology
- Make Network Connections
- Install RSLogix 5000 Programming Software
- Configure a Serial Driver
- Set the IP Address for the Computer
- Assign an IP Address to the Packaged Controller
- Configure the EtherNet/IP Driver in RSLinx Software
- Browse the EtherNet/IP Network in RSLinx Software
- Load Firmware
- Install Additional Software
- Additional Resources
- Create a Project Using RSLogix 5000 Software
- Add POINT I/O
- Before You Begin
- What You Need
- Follow These Steps
- Mount and Connect the Network Adapter
- Mount the POINT I/O Modules
- Mount and Wire the POINT I/O Power Supply
- Wire the Adapter and I/O Modules to the Power Supply
- Assign an IP Address to the POINT I/O Adapter
- Add POINT I/O Modules to the Project
- Add Ladder Logic
- Download the Project
- Set the POINT I/O Chassis Size
- Test the POINT I/O Light
- Additional Resources
- Add a PowerFlex 40 Drive
- Add a PanelView Plus 600 Terminal
- Before You Begin
- What You Need
- Follow These Steps
- Mount the PanelView Plus Terminal
- Wire the PanelView Plus Terminal for Power
- Make Network Connections
- Assign an IP Address to the Terminal
- Create a New Application
- Create an RSLinx Enterprise Configuration in FactoryTalk View ME Software
- Create Device Shortcuts to the Controller
- Create the OB16_Light Indicator
- Create a Push Button
- Test the Indicator and Push Button
- Add a Goto Configuration Mode Button
- Assign Keys
- Assign an Initial Screen
- Transfer to the PanelView Plus Terminal
- Test the Application on the PanelView Plus Terminal
- Additional Resources
- Optional - Configuration of the DeviceNet Network
- Before You Begin
- What You Need
- Follow These Steps
- Attach the 1769-SDN Module to the Packaged Controller
- Connect the 1769-SDN Module to the Network
- Connect and Apply Power to the DeviceNet Network
- Set the 1769-SDN Module’s Node Address
- Create a DeviceNet Scanlist
- Create a DeviceNet Configuration File
- Add the 1769-SDN Module to the RSLogix 5000 Project
- Create DeviceNet Tags
- Additional Resources
- Preface
- Overview of the CompactLogix Packaged Controllers
- Network Communication
- Embedded I/O
- Add Additional Local I/O
- Program the Packaged Controller
- Battery Maintenance
- Network Worksheet
- Index
- Back Cover