Rockwell Automation MD60 User Manual Version 3.0 - Manual (Page 101)

Parameters Cross-Referenced by Name C-1
A
PPENDIX
C
Parameters
Cross-Referenced
by Name
Parameter Name No.
Parameter
Group
Default
Value
Page
No.
0 - 10 V Analog Input d020 Display Read Only 9-32
0 - 10 V Analog Input
High A111 Advanced 100.0% 9-24
0 - 10 V Analog Input
Low A110 Advanced 0.0% 9-24
4 - 20 mA Analog Input d021 Display Read Only 9-32
4 - 20 mA Analog Input
High A113 Advanced 100.0% 9-25
4 - 20 mA Analog Input
Low A112 Advanced 0.0% 9-25
Accel Time 1 P039 Basic 5.0 sec 9-7
Accel Time 2 A067 Advanced 10.0 sec 9-11
Auto Restart Delay A093 Advanced 1.0 sec 9-19
Auto Restart Tries A092 Advanced 0 9-18
Comm Data Rate A103 Advanced 4 = 19.2 K 9-22
Comm Format A107 Advanced 0 = RTU 8-N-1 9-23
Comm Loss Action A105 Advanced 0 = Fault 9-22
Comm Loss Time A106 Advanced 5.0 9-23
Comm Node Address A104 Advanced 1 9-22
Comm Status d015 Display Read Only 9-31
Commanded Frequency d002 Display Read Only 9-27
Compensation A097 Advanced 1 = Electrical 9-20
Control Input Status d013 Display Read Only 9-30
Control Source d012 Display Read Only 9-29
Control SW Version d016 Display Read Only 9-31
Current Limit A089 Advanced Amps x 1.8 9-17