Rockwell Automation TLAR Electric Cylinders - Manual (Page 14)

14 TL-Series Electric Cylinders
Rockwell Automation Publication TLAR-IN001B-EN-P - February 2014
TL-Series Electric Cylinder Dimensions (frame 63)
Actuators are designed to metric dimensions. Inch dimensions are approximate conversions from
millimeters. Dimensions without tolerances are for reference.
Electric Cylinder
Cat. No. L7 (1)
mm (in.)
(1) If ordering TLAR-A3xxxx-B4A actuator with brake, add 23.0 mm (0.91 in.) to dimensions L7 and LB.
LB (1)
mm (in.)
P
mm (in.) AD
mm (in.) HD
mm (in.) AM
mm (in.) G1
mm (in.) L1
mm (in.) ZJ (2)
mm
(in.)
(2) The tolerance for this dimension is ±1.0 mm (0.039 in.).
WH
mm
(in.)
TLAR-A3100E-B2A 564.6 (22.23)
144.2
(5.68) 86.0
(3.39) 56.0
(2.20) 99.0
(3.90) 32.0
(1.26) 36.0
(1.42) 28.5
(1.12) 214.0
(8.43) 37.0
(1.46)
TLAR-A3200E-B2A 664.6 (26.17)
TLAR-A3300E-B2A 764.6 (30.10)
TLAR-A3400E-B2A 864.6 (34.04)
TLAR-A3600E-B2A 1064.6 (41.91)
TLAR-A3800E-B2A 1264.6 (49.79)
TLAR-A3100H-B2A 564.6 (22.23)
TLAR-A3200H-B2A 664.6 (26.17)
TLAR-A3300H-B2A 764.6 (30.10)
TLAR-A3400H-B2A 864.6 (34.04)
TLAR-A3600H-B2A 1064.6 (41.91)
TLAR-A3800H-B2A 1264.6 (49.79)