Rockwell Automation FlexPak 3000 DC Drive Version 4.3 - Manual (Page 9)

Introduction to the FlexPak 3000 Drive 1-1
C
HAPTER
1
Introduction to the FlexPak 3000 Drive
The products described in this instruction manual are manufactured by Reliance
Electric Industrial Company.
1.1 Store the Drive
After receipt inspection, repack the drive in its original shipping container until ready
for installation. To ensure satisfactory operation at startup and to maintain warranty
coverage, store the drive as follows:
• In its original shipping container in a clean, dry, safe place.
• In an ambient temperature that does not exceed 65
°
C (149
°
F) or go below -30
°
C
(-22
°
F).
• Within a relative humidity range of 5 to 95% without condensation.
• Away from a corrosive atmosphere. In harsh environments, cover the shipping/
storage container.
• At an altitude of less than 3,000 meters (10,000 ft.) above sea level.
1.2 Drive Identification Nameplate
The FlexPak 3000 drive has a nameplate on the left side of the chassis that identifies
the specific model number design, applicable AC input power and DC output power
data. Refer to the sample nameplate in figure 1.1. All communication concerning this
product should refer to the appropriate model number information.
Figure 1.1 – Sample FlexPak 3000 Nameplates