7 getting assistance from reliance electric – Rockwell Automation FlexPak 3000 DC Drive Version 4.3 User Manual
Page 13

Introduction to the FlexPak 3000 Drive
1-5
1.7
Getting Assistance from Reliance Electric
If you have any questions or problems with the products described in this instruction
manual, contact your local Reliance Electric sales office. For technical assistance, call
864-284-5444.
Dynamic Braking Kit
Provides the hardware, including braking grids,
needed to provide dynamic braking on stop.
908FK,
909FK,
912FK, and
913FK series
D2-3313 or
D2-3374
Enhanced Field
Supply Kit
Provides electronic field trim, field economy, and
the ability to supply 240V field voltage and other
special voltages. This kit replaces the standard
field supply.
923FK series
D2-3413
Field Current
Regulator Kit
Provides field economy, as well as pre-
weakening of the field using a fixed reference or
field weakening for above base speed operation.
Tachometer feedback is required with this kit.
This kit replaces the standard field supply.
911FK series
D2-3336
I/O Expansion Board
Mounts on the FlexPak 3000 chassis and gives
the FlexPak 3000 additional analog, frequency,
and digital I/O capability.
914FK0101
D2-3301
Inverting Fault Circuit
Breaker Kit
This kit is an alternative to drives supplied with
inverting fault fuses.
906FK series
D2-3300 or
D2-3330
NEMA 1 Conversion
Kit
Converts the standard chassis to a NEMA 1
enclosure.
904FK series
D2-3299 or
D2-3331
Operator Interface
Module (OIM) Remote
Mounting Kit
Allows mounting of the OIM up to five meters
from the drive.
905FK0101
D2-3294
Pulse Encoder
Feedback Kit
Allows for digital pulse encoder speed feedback.
907FK0101
D2-3302
Table 1.1 – Drive Modification Kits
Name
Description
Model
Number
I/M Number