Rockwell Automation FlexPak 3000 DC Drive Version 4.3 - Manual (Page 12)

1-4 FlexPak 3000 DC Drive Hardware Reference Version 4.3
1.6 Optional Kits
Reliance offers modification kits that broaden the application range of the drive. A
summary of these kits is presented in table 1.1. Not all kits can be used with all drive
model numbers. Refer to the Standard Drives and Control Products catalog (D-406)
for more information.
Table 1.1 – Drive Modification Kits
Name Description
Model
Number I/M Number
115 VAC Control
Interface Converts customer-supplied 115 VAC signals to
24 VDC for operating a FlexPak 3000. Mounts
separately on the panel or can be mounted in the
bottom of a NEMA 1 enclosed drive. 917FK0101 D2-3338
460 VAC to 230 VAC
Conversion Kit Allows conversion of the 460 VAC FlexPak 3000
to a 230 VAC FlexPak 3000 at one-half the 460
VAC horsepower rating. 916FK series D2-3329
AC Line Disconnect
Kit Allows the three-phase line to be disconnected at
the drive. Molded case switch that mounts on the
chassis of the drive or NEMA 1 enclosure. 901FK series D2-3292,
D2-3365 or
D2-3395
AC Tachometer
Feedback Kit Allows the FlexPak 3000 to accept feedback
signals from AC tachometers to a maximum
voltage of 275 VAC RMS. 907FK0301 D2-3297
AutoMax Network
Communication Board Allows the FlexPak 3000 to communicate on the
Reliance AutoMax Distributed Control System
(DCS). 915FK0101 D2-3318
Blower Motor Starter
Kit Provides a fused AC starter with adjustable
overload and interlocking for control of the three-
phase blower motor used to cool the DC motor. 902FK series D2-3295
DeviceNet
Communication Board Allows a FlexPak 3000 to communicate over the
open protocol DeviceNet network. Mounts inside
the FlexPak 3000 and includes terminals for
network connections. You cannot use the
AutoMax Network Communication board when
using the DeviceNet board. 915FK1100 n/a
Drive Control
Configuration
Software for FlexPak
3000 Windows-based software that allows the user to
connect any personal computer running
Microsoft Windows version 3.1 or later to a
FlexPak 3000 drive. Allows you to create, store,
upload, and download drive configurations. You
can also start and stop the drive, monitor and
change parameters through the PC, and read
and reset the drive's fault log. 2CS3000 D2-3348
ControlNet Network
Communication
Board Allows a FlexPak 3000 to communicate over the
ControlNet network. 915FK2101 D2-3425