Rockwell Automation FANM FanMaster Energy Saving Package - Manual (Page 19)

Allen-Bradley® FanMaster™ Energy Saving Package Installation Manual - Publication FANM-IN001B-EN-P – December, 2009 PN-65329
Chapter
2
FanMaster Installation
General Precautions
!
ATTENTION: Only qualified personnel familiar with Heating,
Ventilating and Air Conditioning (HVAC) systems, adjustable
frequency AC drives and associated instrumentation and
machinery should plan or implement the installation, start-up and
subsequent maintenance of the system. Failure to comply may
result in personal injury and/or equipment damage.
!
ATTENTION: The following information is merely a guide for
proper installation. Rockwell Automation cannot assume
responsibility for the compliance or the noncompliance to any
code, national, local or otherwise for the proper installation of
this product or associated equipment. A hazard of personal injury
and/or equipment damage exists if codes are ignored during
installation.
!
ATTENTION: FanMaster is a HVAC fan motor control device
that when integrated with HVAC building automation systems
and any other control devices does not provide limits for or
protection against loss of freeze status, high temperature, high
static, carbon dioxide/indoor air quality, smoke and fire, and/or
flood control signals. All persons responsible for applying this
equipment must satisfy themselves that the intended application
of this equipment is acceptable.
!
ATTENTION: National Codes and Standards (NEC, VDE,
BSI, etc.) and local codes outline provisions for safely installing
electrical equipment. Installation must comply with
specifications regarding wire types, conductor sizes, branch
circuit protection and disconnect devices. Failure to do so may
result in personal injury and/or equipment damage.