Rockwell Automation 6185-K Economy Line Monitors User Manual - Manual (Page 9)

Installing Your Monitor 9
Publication 6185-UM003C-EN-P
• The Federal Communications Commission has prepared a pamphlet
that addresses the problem of radio frequency interference to radio
and television reception, which should be consulted in case of
problems with such interference. This publication, “How to Identify
and Resolve Radio/TV Interference Problems” (Stock #004-000-
00345-4) may be obtained from the US Government Printing Office,
Washington, DC 20402.
• Determine the minimum and maximum ambient humidity for the
monitor by consulting the Appendix E: Product Specifications on
page 45. Ensure that the humidity of the ambient air will not exceed
these limits. In very dry environments, static charges build up very
readily. Proper grounding of the equipment through the AC power
cord can help reduce the likelihood of static discharges, which may
cause shocks and damage electronic components.
Depending on the options you selected when ordering your 6185
Economy Line monitor, you can install your monitor in of the following
ways:
• Panel mount
• Rack mount
Before Unpacking the Monitor
Before unpacking a new monitor, inspect the shipping carton for
damage. If damage is visible, immediately contact the shipper and
request assistance. Otherwise, proceed with unpacking.
Note: Make sure you keep the original packaging for the monitor
in case you need to return the monitor for repair.
Installing Your Monitor