Rockwell Automation 6185-K Economy Line Monitors User Manual - Manual (Page 23)

Configuring Video Setup 23
Publication 6185-UM003C-EN-P
Changing the Resolution
You can change the resolution in the Display section of the Control
Panel. For guidelines on accessing the Control Panel, see Table C
Procedures for Accessing Monitor Type Manually on page 22.
The following table lists the amount of video memory you need to run in
each video mode:
Table D
Video Memory Requirements
Resolution Color Mode Video Memory
640x480 256 colors (8 bit) 0.4 Mb
High color (16 bit color) 0.7 Mb
True Color (24 bit color) 1.0 Mb
800x600 256 colors (8 bit) 0.6 Mb
High color (16 bit color) 1.0 Mb
True Color (24 bit color) 1.5 Mb
1024x768 256 colors (8 bit) 0.9 Mb
High color (16 bit color) 1.7 Mb
True Color (24 bit color) 2.4 Mb
1280x1024 256 colors (8 bit) 1.5 Mb
High color (16 bit color) 2.6 Mb
True Color (24 bit color) 4 Mb
Note: The 6185-H displays up to 256k colors (18-bit color).
Because most workstations only support 8-bit, 16-bit, or
24-bit color, you must operate the monitor in True Color
mode (24-bit color) to use the full color range of the
monitor. The monitor will interpret the colors correctly.
6185-J and 6185-K uses True Color (24-bit).
The 6185 Economy Line monitors can sample the input video signal and
set themselves up with a press of the AUTO setup button.
The AUTO setup function works with most screens using reasonable
video content, but Rockwell Automation provides a ScreenSet monitor
setup utility to display the best possible image.
Note: The ScreenSet monitor setup utility is designed for 32-bit
Windows operating systems only (Windows 95/98/2000 or
Windows NT 4.0 or greater).
Performing AUTO Setup