Rockwell Automation 6185-K Economy Line Monitors User Manual - Manual (Page 18)

18 6185 Economy Line Monitors
Publication 6185-UM003C-EN-P
6185 Economy Line monitors require a single-phase power supply
providing 90 to 264V AC at 50 to 60 Hz.
Power must be available at a grounded three-pin outlet located nearby.
Whenever possible, connect the monitor to the same AC source that
supplies the computer.
To connect power to the monitor:
1. Turn off the main switch or breaker.
2. Connect the external power supply cable to the 12 VDC power input
connector on the monitor.
Important: If you need an extra cable restraint, Rockwell Automation
provides a lance in the sheet metal, so you can secure the
power cable to the chassis with a tie wrap.
Figure 9
6185 Economy Line Power Connections
3. Connect the plug end of the AC power cord to the AC power
connector on the external power supply.
4. Plug the other end of the AC power cord into the main outlet.
5. Restore AC power.
Connecting Power