Rockwell Automation 6185-K Economy Line Monitors User Manual - Manual (Page 10)

10 6185 Economy Line Monitors
Publication 6185-UM003C-EN-P
Panel mount monitors are designed to provide protection against water
and dust to NEMA 4/4X/12 (IP65/IP53 equivalent) standards.
Slides or shelves are not required because the panel mount monitor is
designed to be supported by the panel in which it is installed.
Figure 5
Generic Panel Mount Diagram
Note: Your monitor may differ from the above graphic.
Tools Needed for Panel Mount Installation
In addition to the tools required to make the panel cutout, you will need
the following tools:
• 3/8" deep well socket
• ¼" drive extension – 6" or longer
• ¼" drive ratchet or ¼" drive torque ratchet
Installing your Monitor in
a Panel