Rockwell Automation 2708-DH5B2L_DH5B4L Attended Workstation - Manual (Page 84)

Chapter 8
Host Communications
8–9
> T – Set Time
Causes the time and date in the destination workstation to be set to the value
provided as a parameter.
Directive: > T hhmmssnnyymmddw
Where: hh = hours
mm = minutes
ss = seconds
nn = 1/100 second
yy = year
mm = month
dd = day #
w = dayof week
Action: resets time and date in the destination workstation. The entire string
is mandatory. You cannot, for example, set only the time and leave
the date portion off, or the workstation’s date will be set to zeros.
The “w” (day of the week: Sunday – 1) parameter is, however,
optional: if ommited or specified in error, the workstation will
calculate and set its own day of the week.
> Z – Zero Reset Error
Used to zero the reset error and powerfail counters on the designated
workstation. Intended for internal use only.
Directive: > Z
Action: resets the error and powerfail counters
Network Directives (cont’d)