Rockwell Automation 2708-DH5B2L_DH5B4L Attended Workstation - Manual (Page 122)

A–B
A
Appendix
A–1
2708-DH5B2L and -DH5B4L Workstation
Specifications
Electrical – 2708-NP1
Input Line Voltage: 90 to 130 V, 60 Hz
Current Requirements: 175 mA to 425mA at AC input for standard
DH5 workstation. (Dependent on which
scanner chosen)
Power Output: At full load 24V; 40VA – U.L. Listed
Electrical – 2708-NP2
Input Line Voltage: 198 to 264V, 50 Hz
Current Requirements: 90mA to 220mA at AC input for standard
DH5 workstation. (Dependent on which
scanner chosen.)
Power Output: At full load 24V; 40VA – U.L. Listed
Mechanical – 2708-DH5B2L and -DH5B4L
Enclosure: NEMA Type 1
Weight: 4.73 lbs. (2.25 kilograms)
Height: 2.25 inches (57.2 millimeters)
Width: 9.125 inches (231.8 millimeters)
Depth: 7.75 inches (196.7 millimeters)
Environment: Ambient temperature range of
4
°
C to 50
°
C (40
°
F to 120
°
F)
Relative Humidity 5% to 95% (non-condensing)
FCC: This product compiles with the requirements
of FCC Part 15 Rules for Class A
Computing Devices.
Communication Ports
Host Port: Labeled COM1, 9 pin DIN male connector
Auxiliary Port: Labeled COM2, 9 pin DIN male connector
Network Port: Labeled 485 NET, 9 pin DIN female
connector
Barcode Port: Labeled BARCODE, compatible with
Allen-Bradley hand-held scanning devices.